Construction
Introduction to the Construction Products Directive
89/106/EEC Construction Products Directive, referred instruction CPD (Construction Products Directive). Covers all construction-related products, the directive lays down the basic requirements, harmonization of standards and implementation guidelines explicitly technical details.
"Construction product" means any permanent way, including any products in construction projects, including buildings and civil engineering construction projects.
Examples of building products: fire detection and fire alarm systems, architectural hardware, tiles, building fiberglass, flooring, sanitary ware ...
Products must apply to building works (the whole project and works independent part) consistent with its intended use, taking into account the economy, as such, the project must comply with includes the following basic requirements of the regulatory conditions to meet these requirements. In the case of normal maintenance, these requirements must be met within a reasonable economic life of This usually related to the action can be expected.
A mechanical resistance and stability
The design and construction of the building works must make it to bear the load in the construction and use may not lead to the following accidents:
- The project as a whole or partial collapse;
- Deformed to the extent not allowed;
- Load-bearing structures is severely deformed, causing the damaged works other parts or devices or equipment installed;
- Accident damage and the original intention is not commensurate.
2 fire safety
Construction engineering design and construction must be the burst of fire:
- The structural carrying capacity to maintain a certain period of time;
- Within the scope of works, fire, smoke generation and spread is restricted;
- To make the fire spread to the adjacent construction works is limited;
- To flee the project or otherwise rescue;
- The safety of the rescue personnel are taken into account.
3 health, health and the environment
Construction engineering design and construction must ensure that its not within the scope of works or neighborhood health and health threats, in particular, the following occurs:
- The release of toxic gases;
- The air of harmful particles or gases;
- The release of harmful radiation;
- Soil or water pollution and poison;
- Clear improper waste water, smoke, waste or waste;
- Various parts of the project or the inner surface of the wet.
4 the use of safety
The design and construction of the building works shall not cause operation or use of the process, such as slip, fall, collision, burns, electric shock, explosion injured unacceptable risk of accident.
Five noise protection
Construction engineering design and construction must be within the scope of works and nearby residents can be aware of the noise control at a low level, so that their health is not threatened and to make them in a satisfactory environment for sleep, rest and work.
6 energy saving and thermal insulation
According to the local climatic conditions and personnel, construction, heating, cooling, ventilation must be used in the design and construction to ensure as little as possible of the energy needed
89/106/EEC Construction Products Directive, referred instruction CPD (Construction Products Directive). Covers all construction-related products, the directive lays down the basic requirements, harmonization of standards and implementation guidelines explicitly technical details.
"Construction product" means any permanent way, including any products in construction projects, including buildings and civil engineering construction projects.
Examples of building products: fire detection and fire alarm systems, architectural hardware, tiles, building fiberglass, flooring, sanitary ware ...
Products must apply to building works (the whole project and works independent part) consistent with its intended use, taking into account the economy, as such, the project must comply with includes the following basic requirements of the regulatory conditions to meet these requirements. In the case of normal maintenance, these requirements must be met within a reasonable economic life of This usually related to the action can be expected.
A mechanical resistance and stability
The design and construction of the building works must make it to bear the load in the construction and use may not lead to the following accidents:
- The project as a whole or partial collapse;
- Deformed to the extent not allowed;
- Load-bearing structures is severely deformed, causing the damaged works other parts or devices or equipment installed;
- Accident damage and the original intention is not commensurate.
2 fire safety
Construction engineering design and construction must be the burst of fire:
- The structural carrying capacity to maintain a certain period of time;
- Within the scope of works, fire, smoke generation and spread is restricted;
- To make the fire spread to the adjacent construction works is limited;
- To flee the project or otherwise rescue;
- The safety of the rescue personnel are taken into account.
3 health, health and the environment
Construction engineering design and construction must ensure that its not within the scope of works or neighborhood health and health threats, in particular, the following occurs:
- The release of toxic gases;
- The air of harmful particles or gases;
- The release of harmful radiation;
- Soil or water pollution and poison;
- Clear improper waste water, smoke, waste or waste;
- Various parts of the project or the inner surface of the wet.
4 the use of safety
The design and construction of the building works shall not cause operation or use of the process, such as slip, fall, collision, burns, electric shock, explosion injured unacceptable risk of accident.
Five noise protection
Construction engineering design and construction must be within the scope of works and nearby residents can be aware of the noise control at a low level, so that their health is not threatened and to make them in a satisfactory environment for sleep, rest and work.
6 energy saving and thermal insulation
According to the local climatic conditions and personnel, construction, heating, cooling, ventilation must be used in the design and construction to ensure as little as possible of the energy needed
